BASEMENT WALL TO ENGINEER'S /
ARCHITECT'S SPECIFICATION
60401
SECTION
FT08: CYCLE STAND
03A
NBS: Q50/210
FT08 - BIKE RACKS
SUPPLIER:STREETLIFE
PRODUCT:SOLID BIKE RACKS
70X70MM CROSS SECTION; 700MM (W) X 750 MM (H)
MATERIAL: STEEL AND HARDWOOD SLAT
COLOUR:
POWDER COATED, RAL: TBC, FSC HARDWOOD
CONCRETE FOUNDATION TO ENGINEERS
SPECIFICATION & MANUFACTURER'S
RECOMMENDATION
750
750
60401
PLAN
FT08: CYCLE STAND
03B
03A
60401
NBS: Q50/210
FT08 - BIKE RACKS
SUPPLIER:STREETLIFE
PRODUCT:SOLID BIKE RACKS
70X70MM CROSS SECTION; 700MM (W) X 750 MM (H)
MATERIAL: STEEL AND HARDWOOD SLAT
COLOUR:
POWDER COATED, RAL: TBC, FSC HARDWOOD
1000
LOUVERED VENT TO ALL SIDES OF PLANTER
MATERIAL: STEEL GRATING WITH 77% FREE AREA
FINISH/COLOR: POWDER COATED, RAL TBC
SUPPLIER: TBC
STEEL TRIANGULAR SUPPORT BRACKET AND FOOT
PLATE WHERE NECESSARY TO MANUFACTURER'S
DESIGN.
SLAB AND UPSTAND SHOWN INDICATIVELY.
TO ENGINEER'S DRAWINGS AND SPECIFICATIONS
1360
NBS: Q31/292B
BESPOKE VENTED RAISED PLANTER EDGE
MATERIAL: STEEL
SIZE: 1360MM X 17200MMX 350MM
FINISH/COLOR: POWDER COATED, RAL TBC
SUPPLIER: STREETLIFE OR SIMILAR APPROVE
STEEL TRIANGULAR SUPPORT BRACKET AND FOOT PLATE
WHERE NECESSARY TO MANUFACTURER'S DESIGN.
20MM DRAINAGE BOARD
CONNECTED TO 50MM DIAMETER DOWNPIPE AT EITHER
END OF THE VENT STRUCTURE TO ALLOW
DRAINAGE TO FLL AND TO THE NEARBY SLOT DRAIN.
LOW GROWING ORNAMENTAL PLANTING WITHIN
REDUCED SOIL DEPTH ZONE. MINIMUM 250MM SOIL
DEPTH TO PLANTER
FT04 - BESPOKE VENTED RAISED PLANTER EDGE
PLAN
01B
60401
60401
SECTION
FT04 - BESPOKE VENTED RAISED PLANTER EDGE
01A
SLAB PENETRATION - SIZING AND LOCATION TO BE
CONFIRMED BY ARCHITECT/ENGINEER
SLAB PENETRATION
PROPOSED SLOT DRAIN
NBS: Q31/292B
BESPOKE VENTED RAISED PLANTER EDGE
MATERIAL: STEEL
SIZE: 1360MM X 17200MMX 300MM
FINISH/COLOR: POWDER COATED, RAL TBC
SUPPLIER: STREETLIFE OR SIMILAR APPROVE
STEEL TRIANGULAR SUPPORT BRACKET AND FOOT PLATE
WHERE NECESSARY TO MANUFACTURER'S DESIGN.
SCALE 1:20
SCALE 1:20
SUB-GRADE TO ENGINEER'S
SPECIFICATION
BUILD UP DETAIL TO ENGINEER'S
SPECIFICATION
40MM MORTAR BEDDING
BUILD UP TO BE CONFIRMED BY
ARCHITECTS
NBS: Q25/310A
01A
60401
SUB BASE TO ENGINEER'S
SPECIFICATION &
MANUFACTURER'S
RECOMMENDATION
SUB-GRADE TO ENGINEER'S
SPECIFICATION
250
1360
30
50
1000
NOTE:
1.
THIS DRAWING ILLUSTRATES THE DESIGN INTENT FOR THE FT04.
2.
ALL ELEMENTS DIMENSIONS SHOWN ARE INDICATIVE AND SHALL BE CONFIRMED BY SELECTED
MANUFACTURER
3.
MANUFACTURER TO DEVELOP DESIGN INTENT AND SUBMIT FABRICATION DRAWINGS TO DESIGN
TEAM FOR COMMENTS AND COORDINATION PRIOR TO THE FABRICATION.
4.
WHERE STATED ON THE DRAWING, METALWORK TO RECEIVE A POWDER COATED FINISH IN THE RAL
COLOUR AS SPECIFIED IN THE LANDSCAPE SPECIFICATIONS DOCUMENT
5.
ANY EXPOSED FIXINGS SHALL BE PAINTED TO MATCH STEEL COLOUR AFTER THE INSTALLATION
6.
STRUCTURAL ENGINEER INPUT REQUIRED ON THE WHOLE STRUCTURE OF THE LOUVRE AND
STRUCTURAL FRAME SUPPORTING THE PLANTER.
7.
FIXING TO CONCRETE TO BE COORDINATED WITH ENGINEERS.
METAL CLADDING TO CONCRETE UPSTAND,
POWDER COATED, RAL TBC, TO MATCH WITH THE
PLANTER
SLOT DRAIN TO CIVIL ENGINEER'S
RECOMMENDATION AND DETAILS
METAL/CONCRETE STRUCTURAL FRAME
SUPPORTING LOUVRE AND PLANTER TO
STRUCTURAL ENGINEER'S DETAIL AND
SPECIFICATION
595
750
BESPOKE PLANTER EDGE COVERING METAL/CONCRETE
STRUCTURE TBC, DIMENSIONS DEPENDING ON
STRUCTURAL ENGINEER'S INPUT
NBS Q50/232
FT06B - CUBIC SEATS TO FT05A
SUPPLIER: STREETLIFE OR SIMILAR APPROVED
PRODUCT: ROUGH&READY 6 BENCH
SIZE OVERALL: 589 MM (W) X 3000 MM (W) X 450 MM (H)
SIZE OF BEAMS: 70MM (W) X 590MM (L) X 150MM (H)
MATERIAL/FINISH: POWDER COATED, RAL TBC, FSC HARDWOOD BEAMS
60401
02B
35
70
02A
60401
700
NBS Q50/230
FT05 - BESPOKE LONG TABLE SETS WITH PLANTER IN THE
CENTRE OF TABLE
SUPPLIER: STREETLIFE OR SIMILAR APPROVED
PRODUCT:BESPOKE TABLE WITH ROUGH&READY BEAMS
SIZE OVERALL: AS DRAWING 2319-EXA-ZZ-00-DR-L-10000
SIZE OF BEAMS:1500MM/500MM (L) X 70MM(W) X 150MM(H)
MATERIAL/FINISH: FSC HARDWOOD BEAMS TO MATCH WITH
SEATING CUBES
500
500
500
60401
PLAN
FT05 - BESPOKE LONG TABLE WITH PLANTER IN THE CENTRE
02A
PLAN
FT05 - BESPOKE LONG TABLE WITH PLANTER IN THE CENTRE
STEEL STRUCTURE TO MANUFACTURER'S DETAILS
SUPPLIER: STREETLIFE OR SIMILAR APPROVED
MATERIAL/FINISH: POWDER COATED IN RAL 7044
NBS Q31/292A
FT 03 - FT03 - RAISED PLANTER EDGE
SUPPLIER: STREETLIFE OR SIMILAR APPROVED
PRODUCT:ROUGH&READY STRAIGHT TREE ISLES
SIZE: 800MM (W) X 10496MM (L) X 800 (H) MM
150
570
590
NBS Q50/230
FT05 - BESPOKE LONG TABLE SETS WITH PLANTER IN THE
CENTRE OF TABLE
SUPPLIER: STREETLIFE OR SIMILAR APPROVED
PRODUCT:BESPOKE TABLE WITH ROUGH&READY BEAMS
SIZE OVERALL: AS DRAWING 2319-EXA-ZZ-00-DR-L-10000
SIZE OF BEAMS:1500MM/500MM (L) X 70MM(W) X 150MM(H)
MATERIAL/FINISH: FSC HARDWOOD BEAMS TO MATCH WITH
SEATING CUBES AND BENCHES
NBS Q50/232
FT06B - CUBIC SEATS TO FT05A
SUPPLIER: STREETLIFE OR SIMILAR APPROVED
PRODUCT: ROUGH&READY 6 BENCH
SIZE OVERALL: 589 MM (W) X 3000 MM (L) X 450 MM (H)
SIZE OF BEAMS: 70MM (W) X 3000 MM (L) X 150MM (H)
MATERIAL/FINISH: POWDER COATED, RAL TBC; FSC HARDWOOD BEAMS
CONCRETE FOOTING TO MANUFACTURE'S SPECIFICATION
BUILD UP TO ARCHITECT'S AND ENGINEER'S DETAILS
FIXING TO MANUFACTURERS SPECIFICATION
1500
500
500
500
30
70
5.918
BASEMENT SLAB INDICATIVE.
EXACT SSL TO BE CONFIRMED IN THE
FOLLOWING STAGE.
6.623
BS Q50/231
FT06A - CUBIC SEATS TO FT05A
SUPPLIER: STREETLIFE OR SIMILAR APPROVED
PRODUCT: ROUGH&READY (R&R) CUBES
SIZE OVERALL: 590MM X 590MM X 450MM (H)
SIZE OF BEAMS: 70MM (W) X 590MM (L) X 150MM (H)
MATERIAL/FINISH:
POWDER COATED, RAL TBC, FSC HARDWOOD BEAMS
NBS Q50/231
FT06A - CUBIC SEATS TO FT05A
SUPPLIER: STREETLIFE OR SIMILAR APPROVED
PRODUCT: ROUGH&READY (R&R) CUBES
SIZE OVERALL: 590MM X 590MM X 450mm (H)
SIZE OF BEAMS: 70MM (W) X 590MM (L) X 150MM (H)
MATERIAL/FINISH: MATERIAL/FINISH: POWDER COATED,
RAL TBC, FSC HARDWOOD BEAMS
590
30
70
BUILD UP DETAIL TO ENGINEER'S
SPECIFICATION
MORTAR BEDDING
TO BE CONFIRMED BY THE CIVIL
ENGINEER
North
0
1m
1:20 @ A1
0161 850 8101
Manchester
T:
Z:\MANCHESTER PROJECTS\2023\2319 VILLIERS SQUARE\01 BIM\02 CAD\03 SHEET LAYOUT\02 RIBA 4 TENDER\2319-EXA-ZZ-00-DR-L-60401.DWG
E-MAIL [email protected]
WEB www.exteriorarchitecture.com
Rev
Project title
Drawing title
Scale
Drawn
Status
Checked
Date
Approved
No dimensions are to be scaled from this drawing.
All dimensions are to be checked on site.
Area measurements for indicative purposes only.
This drawing is the property of Exterior Architecture Ltd.
No part of the drawing may be reproduced in any manner
without permission from Exterior Architecture Ltd.
Description
Date
Drawing number
Revision
Issued By
LONDON
Unit 17.1, The Leather Market, 11-13 Weston Street, London, SE1 3ER
MANCHESTER
Studio 537, The Royal Exchange, St Anns Square, Manchester, M2 7DH
Client
VILLIERS SQUARE
DETAILS SHEET - FURNITURE
(SHEET 2 OF 2)
2319-EXA-ZZ-00-DR-L-60401
16.12.2024
P02
EXA
SL
SM
P01
STAGE 4 DRAFT
11.11.2024
P02
STAGE 4 ISSUE
16.12.2024
--
--
--
--
--
--
--
--
--
--
--
--
TEVIR GROUP
STAGE 4
Copyright in submitted documents remains with their authors. Request removal
